电子功能外延薄膜的电沉积

电沉积作为一种在温和条件下从溶液中合成材料的技术已被广泛应用于在导体和半导体基底表面合成各种功能材料。电沉积一般由人为施加于基底的电刺激（如：施加电位/电流）来触发。这种电刺激通过氧化或还原靠近基底表面的溶液层内部的离子、 分子或配合物从而使该溶液层偏离其热力学平衡状态,随后引起目标产物在基底表面的沉积。在电沉积过程中, 许多实验参数都可能从不同的方面对沉积物的物化性质造成影响。迄今为止,已通过电沉积制备出多种单质（包括金属和非金属单质）、 化合物（例如：金属氧化物、金属氢氧化物、 金属硫化物等）以及复合材料。电沉积制备的这些材料大多为多晶、 织构或外延薄膜的形式。其中, 外延薄膜是一种具有特定的面外和面内晶体生长取向且其晶体取向受基底控制的类单晶薄膜。由于外延薄膜中高度有序的原子排列,它们常呈现出独特的电磁性质。本文总结了常见的电沉积合成路线及影响沉积物外延生长的关键实验因素。此外, 本文简要介绍了用于表征外延薄膜的技术。最后, 本文还讨论了一些采用电沉积制备的具有特殊电子、 电磁及光电特性的功能外延薄膜。     

嵌段共聚物薄膜快速自组装方法

嵌段共聚物 (BCP) 薄膜可通过不同的退火方法诱导其微相分离,从而获得大面积圆柱状、层状和球状等纳米图案。这些长程有序的纳米结构形态,已经广泛应用在纳米光刻和电子器件等多个领域中。目前,有效且快速的退火方法仍然是BCP薄膜自组装技术中的研究热点。本文首先介绍了制备BCP薄膜纳米结构图案常用的退火技术,然后综述了三种新型快速退火技术,最后分析总结了这些退火技术的优缺点。     

Characterization of a highly stable zwitterionic hydrophilic interaction chromatography stationary phase based on hybrid organic–inorganic particles

We have characterized a sulfobetaine stationary phase based on 1.7 μm ethylene-bridged hybrid organic–inorganic particles, which is intended for use in hydrophilic interaction chromatography. The efficiency of a column packed with this material was determined as a function of flow rate, demonstrating a minimum reduced plate height of 2.4. The batch-to-batch reproducibility was assessed using the separation of a mixture of acids, bases, and neutrals. We compared the retention and selectivity of the hybrid sulfobetaine stationary phase to that of several benchmark materials. The hybrid sulfobetaine material gave strong retention for polar neutrals and high selectivity for methyl groups, hydroxy groups, and configurational isomers. Large differences in cation and anion retention were observed among the columns. We characterized the acid and base stability of the hybrid sulfobetaine stationary phase, using accelerated tests at pH 1.3 and 11.0, both at 70°C. The results support a recommended pH range of 2–10. We also investigated the performance of columns packed with this material for metal-sensitive analytes, comparing conventional stainless steel column hardware to hardware that incorporates hybrid surface technology to mitigate interactions with metal surfaces. Compared to the conventional columns, the hybrid surface technology columns showed a greatly improved peak shape.     

Oligo-Quinolylene–Vinylene Foldamers

Quinoline based aromatic amide foldamers are known to adopt stable folded conformations. We have developed a synthetic approach to produce similar oligomers where all amide bonds, or part of them, have been replaced by an isosteric vinylene group. The results of solution and solid state structural studies show that oligomers exclusively containing vinylene linkages are not well folded, and adopt predominantly flat conformations. In contrast, a vinylene segment flanked by helical oligoamides also folds in a helix, albeit with a slightly lower curvature. The presence of vinylene functions also result in an extension of π-conjugation across the oligomer that may change charge transport properties. Altogether, these results pave the way to foldamers in which both structural control and specific electronic properties may be engineered.     

锂金属负极人造保护膜的研究进展

金属锂因其具有极高的理论容量(3860 mAh·g^?1)、最低的电极电位(?3.04 V vs.标准氢电极)和低的密度(0.534 g·cm^?3),被认为是最具潜力的负极材料。但循环过程中不可控的枝晶生长及不稳定的固体电解质相界面膜所引起的安全隐患和电池库伦效率低等问题严重阻碍了锂金属负极的发展。通过在电极表面构建人造保护膜可以有效调控锂离子沉积行为,因此人造保护膜的构建是一种简单高效抑制锂枝晶生长的策略。本综述将从聚合物保护膜、无机保护膜、有机-无机复合保护膜和合金保护膜总结了人造保护膜的构建方法、抑制锂枝晶生长机理,为促进高比能锂金属电池的商业化应用提供借鉴参考作用。     

Electrospun Aspirin/Eudragit/Lipid Hybrid Nanofibers for Colon-targeted Delivery Using an Energy-saving Process

Both electrospinning apparatus and their commercial pro-ducts are extending their applications in a wide variety of fields. However, very limited reports can be found about how to implement an energy-saving process and in turn to reduce the production cost. In this paper, a brand-new type of coaxial spinneret with a solid core and its electrospinning methods are developed. A novel sort of medicated Eudragit/lipid hybrid nanofibers are gene-rated for providing a colon-targeted sustained release of aspirin. A series of characterizations demonstrates that the as-prepared hybrid nanofibers have a fine linear morphology with the aspirin/lipid separated from the matrix Eudragit to form many tiny islands. In vitro dissolution tests exhibit that the hybrid nanofibers are able to effectively prevent the release of aspirin under an acid condition (8.7%±3.4% for the first two hours), whereas prolong the drug release time period under a neutral condition(99.7±4.2% at the se-venth hour). The energy-saving mechanism is discussed in detail. The prepared aspirin-loaded hybrid nanofibers can be further transferred into an oral dosage form for potential application in counte-ring COVID-19 in the future.     

银负载量对网状TiO_2柔性薄膜电极储锂性能的影响

采用水热法结合银镜反应制备出一系列不同Ag负载量(2.2%、4.0%、6.4%,w/w)改性的3D纳米网状结构Ag@Ti O2薄膜电极。利用电感耦合等离子体技术(ICP)、X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和X射线能谱(EDX)等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在Ti O2纳米线表面。电化学测试数据则表明,4.0%(w/w)负载量的Ag@Ti O2相比于未改性和其他负载量的Ti O2纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 m A·g~(-1)的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 m Ah·g~(-1),在200 m A·g~(-1)下循环80次后容量保持率仍能达到99.8%。     

基于{PMo_(12)O_(40)(VO)_(0.5)}的Cu(Ⅰ)配合物的合成及荧光性质研究

利用磷钼十二酸、偏钒酸铵、CuCl_2·2H_2O和3,3′,5,5′-四甲基-4,4′-联邻二氮杂茂(H_2X)在水热条件下反应,合成出了1个新的多酸基杂化化合物Cu_4(H_2X)_4[(PMo_(12)O_(40)(VO)_(0.5))].通过X射线单晶衍射、红外光谱和热重分析等测试手段对该化合物进行了结构表征.单晶结构解析表明该化合物为2D层状化合物,属于单斜晶系,C2/c空间群,晶胞参数a=2.637 6(5)nm,b=1.542 2(5)nm,c=2.057 0(5)nm,α=90.000(5)°,β=112.677(5)°,γ=90.000(5)°,V=7.720(3)nm~3,Z=4,R_1=0.061 5,wR_2=0.164 6.     

金属氯化物-苯并噻唑有机-无机杂化化合物的合成、表征及荧光性质

金属卤化物MCl₂（M=Pb²⁺,Cd²⁺,Co²⁺）分别与苯并噻唑（btz）在浓盐酸中、80 ℃下反应,合成了3种有机-无机杂化化合物：（btzH）[（PbCl₃）] （1）,（btzH）₂[CdCl₄]·2H₂O （2）和（btzH）₂[CoCl₄]·2H₂O （3）,其中化合物2和3结构相似。对化合物1~3进行了粉末衍射、红外和紫外光谱、元素分析、热重分析以及X射线单晶衍射表征。荧光测试发现：化合物1~3在393 nm处有发射峰,该荧光来源于苯并噻唑环中电子的π…π跃迁。